Home / Federal careers / WG-5806
Mobile Equipment Servicing
This standard is used to grade nonsupervisory work involved in servicing automotive and mobile equipment such as automobiles, trucks, buses, ambulances, forklifts, and bulldozers. Typical service includes dispensing gasoline, checking fluid levels and tire pressures, inflating tires, washing cars, lubricating vehicles, installing simple accessory items, and changing and repairing tires and tubes.
What WG-5806 pays
Federal Wage System pay is set by local prevailing wage surveys, so it moves with the wage area rather than a national table.
Wage Grade rates are published per wage area rather than nationally, so the number that matters is the one for the installation you are applying to.
Source: DoD Civilian Personnel Advisory Service wage schedules.
Qualification requirements
OPM's standard for WG-5806, as written.
Mobile Equipment Servicing
Federal Wage System Position
Work Performed
This standard is used to grade nonsupervisory work involved in servicing automotive and mobile equipment such as automobiles, trucks, buses, ambulances, forklifts, and bulldozers. Typical service includes dispensing gasoline, checking fluid levels and tire pressures, inflating tires, washing cars, lubricating vehicles, installing simple accessory items, and changing and repairing tires and tubes.
Physical Effort
described at the grade 1 level, occasionally heavy lifting is required at this grade such as handling cans and drums or petroleum products weighing up to 18 kilograms (40 pounds). U.S. Office of Personnel Management 3 Mobile Equipment Servicing, 5806 TS-33 September 1974
Working Conditions
are similar to those described at the
What this means if you served
- Write the duties, not the billet. OPM credits military experience on the work performed, and does not use rank or pay to judge specialized experience.
- Put the training and certifications you earned in service on the page. They count here.
- Claim your veterans preference on the application. It is not applied for you.
- No positive education requirement here, so qualifying experience can stand in for the education.
How to qualify for WG-5806
1Review Trade/Craft Requirements
WG positions require demonstrated skill in a specific trade or craft. Review the job announcement for required certifications, licenses, and hands-on experience.
2Document Your Experience
WG positions are experience-based, not grade-based. Document your years of hands-on trade experience, apprenticeships completed, and journeyman status if applicable.
3Gather Credentials
Collect your DD-214, trade certifications (welding, electrical, HVAC, etc.), apprenticeship completion certificates, and any specialized licenses required for your trade.
4Build Your Federal Resume
Two pages, the same USAJOBS limit that has applied since 27 September 2025. Lead with hands-on trade experience: the tools and equipment you ran, safety training, the projects you finished, and hours worked per week.
5Apply on USAJOBS
Search for WG positions in your trade specialty, carefully answer assessment questions about your skill level and experience, and submit before the closing date.
Military jobs that map to this series
Amphibious Combat Vehicle (ACV) Crewmember
Mobile equipment servicing covers field service and PM on government vehicle fleets, a clean fit for crew-level maintenance experience.
Skills that carry over: Mobile equipment servicing, Field maintenance, Lubrication and PM, Component replacement.
Usually opens at: WG-7, WG-8, WG-9.
Stryker Systems Maintainer
WG-5806 Mobile Equipment Servicing is a solid stepping-stone for stacking federal experience while building toward the 5803 journeyman level.
Skills that carry over: Equipment servicing, Lubrication and inspection, Fleet support, Preventive maintenance.
Usually opens at: WG-5, WG-6, WG-8.
Assault Amphibious Vehicle (AAV) Crewmember
WG-5806 Mobile Equipment Servicing covers fueling, servicing, and basic upkeep of vehicle fleets.
Skills that carry over: Vehicle servicing, Fluid and lubrication systems, Fleet upkeep, Inspection.
Usually opens at: WG-5, WG-6, WG-7.
Your record can qualify you even when your code is not on this list. The crosswalk is a starting point, not the gate.
Typical duties
- Perform mobile equipment servicing tasks as assigned
- Follow safety procedures and regulations
- Maintain and operate tools and equipment
- Complete work orders and documentation
- Coordinate with team members and supervisors
Key competencies
Ability to follow safety procedures and regulations
Knowledge of tools and equipment for the trade
Skill in performing physical tasks requiring manual dexterity
Ability to work independently and as part of a team
Ability to read and interpret instructions and procedures
Words the announcement will use
Use the ones your record actually supports. A rater is matching your experience against the specialized experience statement, and a keyword with nothing behind it does not survive that.
Questions about WG-5806
What is a Mobile Equipment Servicing worker?
A Mobile Equipment Servicing worker (WG-5806) performs routine maintenance and servicing tasks on government vehicles and mobile equipment including cars, trucks, buses, forklifts, and construction equipment. Duties include dispensing fuel, checking fluid levels and tire pressures, washing vehicles, performing lubrication services, and changing tires. This entry-level trade position requires attention to detail and basic mechanical knowledge.
How much does a federal Mobile Equipment Servicing worker make?
Federal Mobile Equipment Servicing workers are paid under the Federal Wage Grade (WG) pay system, with rates varying by geographic location. WG-5806 positions typically range from WG-5 to WG-8 depending on complexity. Check the Defense Civilian Personnel Advisory Service wage schedules for your specific locality pay rates.
What are the requirements for WG-5806 positions?
WG-5806 positions require demonstrated ability to perform vehicle servicing tasks safely and efficiently. Entry-level positions may require only basic mechanical aptitude and willingness to learn. Higher grades require progressively more experience with different types of equipment and servicing procedures. A valid driver's license is typically required.
Can military experience substitute for education in WG-5806?
Yes, military vehicle maintenance and motor pool experience translates directly to WG-5806 positions. Veterans with MOS codes like Army 91B (Wheeled Vehicle Mechanic), Marine Corps 3521 (Automotive Maintenance Technician), or similar ratings have excellent qualifications. Document your experience servicing military vehicles and equipment on your federal resume.
What is the career progression for Mobile Equipment Servicing?
Mobile Equipment Servicing workers can advance from WG-5 to WG-8 based on skill development and assignment complexity. Many progress to WG-5823 Automotive Mechanic positions for full repair work. Supervisory positions (WS) offer additional advancement. Cross-training in heavy equipment or specialized vehicles can open additional career paths.
How do I apply for WG-5806 jobs on USAJOBS?
Search USAJOBS for "Mobile Equipment Servicing" or "5806" to find current openings. Many positions are at military installations, GSA motor pools, and federal facilities with vehicle fleets. Emphasize your vehicle servicing experience, safety record, and ability to work with different equipment types. Veterans' preference applies to these positions.
Ready to apply for WG-5806?
A rater matches your record against the announcement's specialized experience statement, inside two pages. BMR writes that shape from your own experience: competency headers, real scope, hours per week, and the supervisor detail the rater checks.