How to Get a CAC for a New Veteran Contractor Hire (TASS Is Now MP ICAM)
Hire veterans who are ready for the job
We turn real military records into clear, civilian resumes so your hiring team can see what each veteran actually did.
A contractor hire can get a CAC only through a DoD government sponsor. The cac.mil page for contractors says "MP ICAM replaces the Trusted Associates Sponsorship System (TASS) functionality." The old Trusted Agent is now the Mission Partner Affiliation Sponsor (MPAS).
You'll get a TASS-to-MP ICAM name table, a 10-step tracker list and a RAPIDS ID checklist.
What Are the TASS Roles Called in MP ICAM?
Your contracting officer or program office may still say "TA" or "TASS." Use this table to match the old words to the new ones.
| TASS term | MP ICAM term | Who holds it |
|---|---|---|
| TASS (Trusted Associates Sponsorship System) | MP ICAM (Mission Partner Identity, Credential, Access Management) | The DMDC system itself |
| Trusted Agent (TA) | Mission Partner Affiliation Sponsor (MPAS) | The government side. Sponsors your hire and manages the card for its whole life. |
| Trusted Agent Security Manager (TASM) | Mission Partner Affiliation Sponsor Manager (MPASM) | The government side. Runs the site and sets up the MPAS accounts. |
| Service Point of Contact (SPOC) | Service Point of Contact (SPOC) | The government side. The top sponsor for a service or agency. |
| None (new in MP ICAM) | Mission Partner Agent (MPA) | Your company. cac.mil says the MPA "will often be a Human Resources representative." |
| Applicant | Applicant | Your new hire |
The MPA is the one that matters for you. cac.mil says the MPA "can initiate application." The MPA can also send the form to your hire and check that they qualify. cac.mil says the role "did not exist in TASS." Ask your MPAS if your company can get one set up.
DoDM 1000.13 Volume 1 says "a contractor cannot perform the TA or TASM role." The sponsor has to be a service member, a DoD civilian, or an approved federal employee.
What Are the Steps From Sponsor Request to Card in Hand?
Paste this list into your onboarding tracker. The two deadlines come from cac.mil. The rest has no set time, so plan around your sponsor's pace.
- Confirm the job qualifies (your PM or HR). DoDM 1000.13 lets a contractor get a CAC for one of three needs:
- Access to a DoD site plus logon to a DoD network.
- Remote logon to a DoD network.
- Access to more than one DoD site on a recurring basis for 6 months or more.
- Find your sponsor (your PM). cac.mil tells contractors who don't know their MPAS or MPASM to "contact their contracting officer." Ask the contracting officer for the MPAS name on your contract.
- Load the company and contract (MPASM or MPAS). The MPASM enters your company's Mission Partner details. Then the MPASM or MPAS enters the contract.
- Start the application (MPAS, MPASM or your MPA). The sponsor starts a DoD credential application for your hire. If your company has an MPA, the MPA can start it and send it to the hire.
- Log in within 7 days (your hire). The hire gets a user ID and password. cac.mil says they "must log into MP ICAM within seven days of the application's approval."
- Finish the form within 30 days (your hire). The hire must "complete the application for a CAC within 30 days of the initial login." They use the MP ICAM Registration Portal.
- Start the background check (sponsor and security office). cac.mil's Getting Your CAC page says sponsors "will initiate a background check." Your sponsor confirms it with your contracting, HR or security office. No card issues until the fingerprint check is favorable and the NACI is submitted.
- Review and approve (the DoD sponsor). The sponsor approves or denies. cac.mil says sponsorship includes "confirming the appropriate personnel vetting." A denial can come from "data discrepancies" or a hire who doesn't meet the access need.
- Get into DEERS (the sponsor). That page also says the sponsor must enter the hire in DEERS "prior to card issuance."
- Pick up the card (your hire). The hire goes to a RAPIDS site for "final verification and processing." Find a site and its appointment options in ID Card Office Online.
Send your hire the two deadlines in writing on day one. If the login or password fails, cac.mil says the hire should contact the MPAS or MPASM.
Plan the start date around the card. For cleared roles, see our guide to when a new hire can begin on an interim clearance.
What Background Check Does the Hire Need Before the Card?
cac.mil says contractors "go through the same background investigation process that other CAC holders go through." DoDM 1000.13 sets the floor.
The hire needs an FBI fingerprint check "with favorable results." A National Agency Check with Inquiries (NACI) must also be submitted. The manual also accepts an "investigation approved in Federal Investigative Standards."
So the card can come before the NACI is done. cac.mil explains why: "the NACI process can take up to 18 months." A CAC may come "after a favorable fingerprint return." The same page warns that if the NACI ends badly, "your CAC will be revoked."
DoDI 5200.46 says the same thing. A CAC "may be issued on an interim basis" after a good fingerprint check. The investigation must also be sent in. It can be a NACI or one "equal to or greater in scope."
That matters if your veteran hire already holds a clearance. DoDI 5200.46 says a clearance decision based on a NACI or higher can count. It "may result in a concurrent CAC decision for that position." Ask the sponsor if your hire's record already meets the bar.
A CAC is not a clearance. Classified access runs through your contract's security terms. See our cleared-hire onboarding guide for that side.
What Does the Hire Bring to the RAPIDS Site?
Send this checklist to your hire before their visit. It comes from cac.mil's Getting Your CAC page and the DoD List of Acceptable Documents (June 2025).
- Two IDs in original form. Both must be on the List of Acceptable Documents. Photocopies don't count, but a sealed certified birth certificate copy does.
- A photo on at least one. cac.mil gives a passport or a driver's license as examples.
- Two different types. The list says the second ID "cannot be of the same type" as the first. A passport plus a Social Security card works.
- Nothing expired. The list says the IDs "shall be neither expired nor cancelled."
- Proof of a name change, if needed. If the two IDs show different names, the list asks for "evidence of a formal name change."
- A PIN. The hire picks a "six (6) to eight (8) digit number" to use as the card's PIN.
- A government email, if they'll use a government computer. cac.mil asks for the full "unclassified Internet email address," not a display name. A personal email won't work.
Does a Veteran's Military ID or Old CAC Count?
No. Your hire needs a new contractor CAC even if they carry another DoD card.
DoDM 1000.13 gives people "a separate ID card" for each group they belong to. Its own example is a Reservist who is also a DoD contractor. That person should use the card that fits the role they're working in.
So a retiree card or a Reserve CAC stays a separate card. At work on your contract, your hire uses the contractor CAC.
An old, expired military CAC won't help at RAPIDS either. The June 2025 list says an expired CAC "is not acceptable for initial issuance." Tell your hire to bring a passport, a driver's license, or another listed ID.
How Long Does the Card Last, and What Happens When the Contract Ends?
Under DoDM 1000.13, a contractor CAC lasts 3 years or until the contract ends, "whichever is shorter." It adds that unfunded options count, so a base year plus two one-year options gets 3 years.
DoDM 1000.13 says the sponsor re-checks the need "every 6 months (180 days)." That's the manual's rule. The MP ICAM portal "allows for verification of the continued need," but cac.mil doesn't name an interval. Ask your MPAS what schedule they use, and put it on your calendar.
When the work ends, the card goes back. cac.mil says "contractors must return their CACs to their MPAS/MPASM at the completion or termination of a contract." Then the card's active status is "terminated within the DEERS and RAPIDS infrastructure."
Build that into your exit checklist. Moving the hire to your own payroll? See our contract-to-hire conversion guide.
If the job doesn't meet the CAC tests, a base pass may fit better. Our guide to getting base access explains how passes work. For the first weeks after the card arrives, use our 90-day veteran onboarding plan.
Steps from cac.mil, DoDM 1000.13 Vol. 1, DoDI 5200.46 and the DoD acceptable documents list, checked November 2026.
What to Do Next
The CAC is the last step of a contract hire. The first step is finding the right person. Reach out to access BMR's veteran talent pool to find your next contract hire. Over 1,000 new profiles are added to BMR every month, and 79,061 resumes have been built on BMR.
Frequently Asked Questions
What happens if my contractor hire loses their CAC?
Do sponsors need training before they can use MP ICAM?
How many contractors can one sponsor manage?
Can a hire who is not a U.S. citizen get an interim CAC?
What if the job needs base access for less than 6 months?
Who fixes a DEERS record problem at the RAPIDS site?
About the author
Brad Tachi is the CEO and founder of Best Military Resume and a 2025 Military Friendly Vetrepreneur of the Year award recipient for overseas excellence. A former U.S. Navy Diver with over 20 years of combined military, private sector, and federal government experience, Brad brings unparalleled expertise to help veterans and military service members successfully transition to rewarding civilian careers. Having personally navigated the military-to-civilian transition, Brad deeply understands the challenges veterans face and specializes in translating military experience into compelling resumes that capture the attention of civilian employers. Through Best Military Resume, Brad has helped thousands of service members land their dream jobs by providing expert resume writing, career coaching, and job search strategies tailored specifically for the veteran community.