Key Personnel Substitution: Notice Days and Request Package

8 min read
Key personnel substitution rules for six agency clauses. Get the notice days, a request package checklist, and a worked crosswalk for a veteran replacement.

Hire veterans who are ready for the job

We turn real military records into clear, civilian resumes so your hiring team can see what each veteran actually did.

Talk to us about hiring veterans

Under agency key personnel clauses, you usually can't swap a named key person until the contracting officer agrees. The Commerce clause, 48 CFR 1352.237-75, wants your request at least 15 working days before a permanent swap. It also wants a replacement whose qualifications equal or exceed the person leaving.

Other agencies set different days, and some set none. So this guide gives you three things. You get a notice-period table for six clauses and a substitution package checklist. You also get a worked crosswalk for a veteran replacement.

This page covers a swap after award, in the middle of performance. For the resume you name in a proposal, see the key personnel proposal resume guide. To count a veteran's years against a labor category, see our LCAT mapping guide.

How many days' notice does your key personnel clause require?

Find the key personnel clause in your own contract first. Your contract may carry an agency clause, or a custom version the contracting officer wrote. Each clause sets its own days, so read yours before you count. The table below sums up six agency clauses we read in full.

Agency clauseWhen to submitContracting officer answersReplacement must be
Commerce, 1352.237-75 (APR 2010).At least 15 working days before a permanent swap.Within 10 working days after all required info.Equal to or better than the person replaced, unless the CO approves an exception.
EPA, 1552.237-72 (APR 1984).First 90 days: no swaps except illness, death, or termination of employment. Notify within 15 calendar days of that event. After 90 days: at least 15 days before a permanent swap.Within 15 calendar days after all required info.Comparable to the person replaced.
HHS, 352.237-75 (DEC 2015).At least 30 days before you voluntarily move the person. Quit or fired with less notice: the most notice you can give.No day count. You need written consent first.Skills, experience and credentials that meet or exceed the contract's requirements.
Homeland Security, 3052.215-70 (DEC 2003).In writing, before the change takes effect. No day count.No day count. No removal until the CO approves.No set test. Send enough info for the CO to judge the impact.
NRC, 2052.215-70 (JAN 1993).Right away, once the person will be out over 30 work days in a row. Same if they will put in much less effort.Promptly, in writing.At least substantially equal ability and qualifications.
NASA, 1852.235-71 (MAR 1989).Reasonably in advance. No day count.No day count. Written consent, or a written ratification.No set test. Justify the swap in enough detail to judge the impact.

Clause text read on Cornell LII's copy of Title 48, checked November 2026.

Look at the last column. Commerce and EPA compare the replacement to the person leaving. HHS compares the replacement to the contract's requirements. That difference changes who you can propose, as the worked example below shows.

Is this a planned change or an unplanned departure?

The clock starts at a different point for each one. So sort the change before you write a word of the request.

Planned change: a promotion or a move to another contract

You control the date, so you owe the full notice. The HHS clause names this case. It covers moving a key person "to other programs or contracts" by choice. Treat a promotion to a corporate role the same way.

A promotion that keeps the person on the contract part time can still trigger a clause. The NRC clause fires when a key person will "devote substantially less effort" than you proposed.

Work backward from the move date. Take the notice days, add the CO's answer days, then add a week for questions. Under the Commerce clause, that is 15 working days, plus 10, plus a week. Plan on about six weeks before the move date.

Don't announce the move to the client team early. The HHS clause says you may not "announce any such change" without written consent.

Unplanned departure: a resignation, illness, death or firing

You don't control the date, so speed matters most. Tell the contracting officer the day you learn of it. Then send the full package as soon as you have a candidate.

Some clauses set this clock in writing. During the first 90 days of performance, EPA gives you 15 calendar days after the event. After that, EPA's 15-day advance notice applies, so tell the CO at once.

HHS asks for "the maximum notice practicable" when someone quits on short notice. Write down the date you learned of the departure, because the CO may ask. Even then, HHS bars you from announcing the change without written consent.

What goes in a key personnel substitution request?

Commerce, EPA and NRC ask for a detailed reason and a complete resume. HHS asks for a justification that names the replacement. It must explain how their skills, experience and credentials meet or exceed the contract's requirements. Homeland Security and NASA ask for enough information to judge the swap's impact.

Send a complete resume even if your clause doesn't ask for one. A missing piece can delay the CO's answer. The Commerce and EPA clocks run from "receipt of all required information."

  1. Cover letter: Name the contract number and the clause by number. Ask for consent to the swap.
  2. Reason for the change: State what happened and the date you learned of it. Keep it plain and true.
  3. Effective date: Give the last day of the outgoing person and the first day of the new one.
  4. Full resume: Send the replacement's complete resume.
  5. LCAT crosswalk: Show each labor category minimum next to the proof that meets it.
  6. Side-by-side table: Compare the outgoing person and the replacement line by line.
  7. Clearance status: Note the level the seat needs and the status your security officer confirmed.
  8. Commitment letter: Include a signed letter from the replacement confirming the start date.
  9. Transition plan: Explain who covers the work until the start date, and how the handoff runs.
  10. Exception request, if needed: Under Commerce, ask in writing for an exception covering any gap against the outgoing person. Say why the work won't suffer.
  11. Modification line: Name the key personnel list change you expect the contract mod to make.

The consent request, the reason, the resume and the exception come from the clause text. So does HHS's explanation of fit, which the crosswalk covers. The other items are our advice. They answer the CO's next question before it gets asked.

How do you prove a veteran replacement meets the labor category?

Build a table the CO can read at a glance. Put each labor category minimum in one row. Then show the outgoing person and the replacement side by side.

This worked example shows how. The labor category below is a sample. Your contract's own wording wins every time.

The seat

A sample "Senior Network Engineer" key seat asks for these minimums:

  • Education: A bachelor's degree in an IT field.
  • Substitution: Four extra years of network work in place of the degree.
  • Experience: Eight years of network work.
  • Clearance: Secret.
  • Certification: CompTIA Security+.

The replacement

The candidate served eight years as an Army 25B. The 25B Information Technology Specialist career guide explains what that job covers. After the Army, the candidate worked four more years as a network lead for a contractor. They have no degree. They hold a current Security+ and a Secret clearance.

Count only the years spent on network work. For this candidate, that's all 12. The LCAT mapping guide linked above shows how to sort relevant years from the rest.

The crosswalk

RequirementLCAT minimumOutgoing personVeteran replacement
Education.Bachelor's, or 4 extra years.Bachelor's in IT.No degree. Uses the 4-year swap.
Network years.8 years, or 12 with the swap.10 years.12 years: 8 as a 25B, 4 as a contractor.
Clearance.Secret.Secret.Secret, confirmed by your security officer.
Certification.Security+.Security+.Security+, current.
Led a team.Not listed.Led 3 engineers.Led a 6-person network team.

Under the HHS test, this candidate looks strong on paper. The CO still decides. HHS compares the replacement to the contract's requirements, and every row meets the LCAT.

Under the Commerce test, the education row needs care. Commerce compares the replacement to the person leaving, and that person held a degree. So ask for the exception the Commerce clause allows. Point to the 12 years of network work against their 10, and the bigger team. Then let the CO decide.

Back each row with proof the CO can check. A duty line from the resume works. So does a cert number, or a note that your security officer confirmed the clearance. Our guide on how to read a security clearance on a resume covers what to confirm.

What if the contracting officer says no, or the seat sits empty?

Ask what the gap is, in writing. Then fix that one gap. You can propose a second candidate, or add proof for the first one. A slow answer is not a yes, either. None of the six clauses says silence counts as approval. So follow up in writing once the answer window passes.

Some clauses spell out what an empty seat can cost. The NRC clause lets the CO end the contract for default or for convenience. That applies if a replacement is "not reasonably forthcoming," or if the lost effort would hurt completion. If you're at fault, the CO can also cut the price or fixed fee for delays or losses.

Even without that language, an empty key seat often means unbilled hours. Our breakdown of the cost of an unfilled cleared role walks through that math.

Be honest about why the person left, and tell the CO early and plainly. A CO who hears early has more room to help.

How do you keep the next departure from becoming a vacancy?

Keep a short bench for each key seat. One or two people who meet the labor category is enough. Check their clearance status and start date every quarter.

Cleared veterans make a strong bench when their eligibility is still current. Our guide to building a veteran talent pipeline before reqs open covers how to keep candidates warm. If a bench candidate's clearance has lapsed, read hiring a veteran whose clearance lapsed before you name them.

Keep a crosswalk on file for every bench name, too. Then the hardest part of the package is built before anyone gives notice. For the wider staffing picture, see how government contractors hire cleared veterans.

What to Do Next

Pull your contract and find the key personnel clause. Write down its notice days and its replacement test. Then find a candidate who clears every row of the crosswalk.

That last step is where BMR fits. 79,061 resumes have been built on BMR. Search the talent pool by clearance and state. Then search the labor category's skills in plain words.

Search BMR's veteran talent pool

Frequently Asked Questions

Is there one FAR key personnel clause that every contract uses?

We did not find one. Key personnel clauses come from agency supplements, like the six in the table above. Some come from language the contracting officer writes into your contract. FAR 52.237-3 is Continuity of Services. It covers the handoff to a follow-on contractor, not swapping a named person.

Does a short leave of absence trigger the key personnel clause?

It depends on the wording. The Commerce timeline, and EPA's after the first 90 days, apply to permanent substitutions. EPA allows no substitution in the first 90 days, except for illness, death, or termination of employment. The NRC clause starts when a key person will miss over 30 work days in a row. If an absence will run long, tell the contracting officer anyway and ask how they want it handled.

Can we tell the client team about the new key person before the CO approves?

Wait for written consent before you name the new person. Under an HHS contract, don't announce any key personnel change without written consent. That holds even if the person quit or was fired. Under other clauses, if the person quit or was let go, tell the client team they're leaving. Say who covers the work under your transition plan.

Does an approved substitution need a contract modification?

Usually, yes. The Commerce clause says the contract will be modified to reflect approved changes. The HHS clause says the contract will be modified to add or delete key personnel. Keep the mod with your copy of the approval.

Does the replacement need the same clearance as the person leaving?

The key personnel clauses we read do not name a clearance. The clearance a seat needs comes from your contract and its labor category. Have your facility security officer confirm the replacement's status before you put it in the package.

About the author

Brad Tachi is the CEO and founder of Best Military Resume and a 2025 Military Friendly Vetrepreneur of the Year award recipient for overseas excellence. A former U.S. Navy Diver with over 20 years of combined military, private sector, and federal government experience, Brad brings unparalleled expertise to help veterans and military service members successfully transition to rewarding civilian careers. Having personally navigated the military-to-civilian transition, Brad deeply understands the challenges veterans face and specializes in translating military experience into compelling resumes that capture the attention of civilian employers. Through Best Military Resume, Brad has helped thousands of service members land their dream jobs by providing expert resume writing, career coaching, and job search strategies tailored specifically for the veteran community.

Found this helpful?

Share it.

More in Hiring Veterans