How to Hire Cleared Veterans for Special Access Programs
Hire veterans who are ready for the job
We turn real military records into clear, civilian resumes so your hiring team can see what each veteran actually did.
A cleared veteran can't start work on a special access program (SAP) on their clearance alone. Each hire also needs a nomination and an approved access request. That's the rule in DoD Manual 5205.07, in effect since January 17, 2025. Then comes an indoctrination briefing.
That extra step is where cleared hires stall. You find a strong veteran with a final Top Secret clearance. Then nobody on your side knows who files what, or who says yes.
Below is the order of work from requisition to read-on. Next come the rules on past SAP access. Then a table of who controls each step, and where to find candidates.
The wider guide to staffing cleared GovCon roles covers sourcing for any cleared seat. This one covers only the SAP layer on top.
What does a SAP seat need beyond the clearance?
The manual calls the step the SAP nomination process. It checks each person for three things:
- A final clearance: based on a favorable decision from the right investigation.
- A shown need to know: a written reason this person needs this program.
- Access eligibility: meets the nomination requirements in Section 13.2, listed below.
The manual says this step "is not an investigation or adjudication." Section 13.2 adds the basic gates for every nominee:
- Citizenship: a U.S. citizen or dual U.S. citizen.
- Clearance level: a final Top Secret or final Secret, as the program needs. An interim doesn't meet this gate.
- Continuous vetting: enrolled in a DoD continuous vetting program.
- Contract cover: for a contractor nominee, a valid and current DD Form 254 that allows SAP access.
Section 12.1 sets the floor by program level. A SAP up to Secret needs at least a final Secret. A SAP up to Top Secret needs at least a final Top Secret. That one rests on a Tier 5 or equal investigation.
Say a nominee misses the clearance, vetting, or DD-254 gate. The requester can then file a letter of compelling need. The program's central office decides. If it says no, the manual says "there is no reconsideration process."
What's the order of work, from requisition to read-on?
"Read on" is the industry's word for it. The manual's word is indoctrination. The steps below follow the manual's order. Your company has a part in each one.
- Confirm your company is cleared: Section 10.2 says SAP primes and subs must be cleared under 32 CFR part 117. If you're new to that, start with the facility clearance basics.
- Check the DD-254 and its SAP addendum: the addendum lists the programs on your contract. Your hire can only be nominated for programs listed there.
- Check the candidate's clearance level: it must be final and at the program's level. They must be in continuous vetting too.
- Make a written offer if they need a new investigation: 32 CFR 117.10(f) lets you submit early if the job needs access on day one. You need a written offer the candidate accepted in writing. Work must start within 45 days of eligibility.
- Have the candidate fill out the pre-screening questionnaire: the PSQ counts as current for 365 days if nothing reportable has changed. Any "yes" answer needs added detail.
- Get a requester who is already accessed: that person completes the justification on the program access request (PAR). They write why your hire needs access. Nobody can nominate themself.
- Send the full package: the PAR, the current PSQ, and detail for any "yes" answers. Add a DD-254 the program security officer has checked.
- Wait for the government review: a trained vetting official checks the package and the clearance record. The program security officer concurs or not. The access approval authority decides.
- Sign, then brief: once the PAR is approved, your hire signs the SAP indoctrination agreement. Then the indoctrination briefing happens. If they won't sign, they get no access.
The manual doesn't print a timeline for any of these steps. So don't promise your program office a start date until the PAR comes back approved.
What does your DD-254 need before you nominate anyone?
The government starts the form. Section 10.1 says the contracting officer's representative begins the DD Form 254. The program security manager or officer then submits it in the NISP Contract Classification System.
For SAP work, the form usually comes with a separate SAP addendum. That addendum lists the program identifiers on your contract. Section 10.1.c then sets a hard line. Contractors can't access SAPs "that are not identified on the SAP addendum."
Two points matter for hiring:
- Subcontractors: the prime's contractor SAP security officer drafts your DD-254. The program security office reviews it before it reaches you. The prime needs that office's approval before it shares any SAP details.
- Missing DD-254: a contractor nominee without a current SAP DD-254 needs extra reasons on the PAR.
The DD Form 254 onboarding guide walks through the base form. The SAP addendum is the part that sets which programs you can staff.
Who nominates your new hire, and who approves?
Your company can't approve SAP access. These people touch the package, in order.
- The requester: someone already accessed to that program. They fill out the PAR and justify the need to know.
- The SAP personnel vetting official (SPO): checks the package and the clearance record in DISS or Scattered Castles. The SPO can't disqualify anyone. They make an initial recommendation and can ask for more review.
- The program security officer (PSO): checks the need to know and marks concur or non-concur.
- The access approval authority (AAA): approves or turns down access.
A "yes" on the questionnaire adds a step. The government activity manager checks the need to know. The program security staff pull current threat data before the AAA decides.
On your side, the key person is your contractor SAP security officer (CSSO). Section 3.1 has the CSSO run SAP security and training at your site. They also coordinate vetting issues with the program office. If your site has no access to JADE, the SAP access database, the CSSO keeps the vetting files.
Does a veteran's past SAP access carry over?
Sometimes. Under Section 12.2, joint force integration programs may grant access through reciprocity. Say a person already holds a DoD SAP access. They won't be denied eligibility for a SAP of the same level, category, and type. They still need four things:
- A checked need to know.
- No new potentially disqualifying information.
- All nomination requirements met.
- All "no" answers on a PSQ dated within the past 365 days.
For "strategic enabler" programs, the manual says they "do not grant access through reciprocity."
Three more rules shape what past access tells you:
- Access ends with a debrief: Section 12.12 calls for a formal debrief when someone no longer needs SAP access. So a veteran who left the job that needed it may have been debriefed.
- Long absences end it too: people away from home over 180 days are debriefed. Guard or military activation counts. Exceptions are a continued need to know there, or written approval from the program's central office.
- Carryover is tied to the contract: a contractor can transfer access only on the same contract. The losing and gaining organizations negotiate the move.
So read past SAP work as proof the person has been through the process before. It doesn't mean they hold access to your program today. Each new program still runs through a nomination.
Plain clearance eligibility works differently. Under 32 CFR 117.10(a)(6), you don't file a new clearance request for someone already cleared by another agency. You use reciprocity under the DNI's SEAD 7 instead.
Will your hire need a polygraph?
It depends on the program. Section 12.4 says people accessed to DoD SAPs "are subject to" counterintelligence-scope and issue-based polygraphs.
Making a polygraph a must for access is a separate call. The Deputy Secretary of Defense approves that, and it must apply the same way to every candidate. The manual also says a CI-scope polygraph can't be "the only basis" for granting or denying access.
Settle two things up front:
- Refusal: once your hire is read on, refusing a polygraph suspends their SAP access right away.
- Program-specific: ask your program security officer whether your program requires one before you write the posting.
The types of polygraph differ a lot. See CI vs full scope vs lifestyle polygraphs for how each one works.
What do you control, and what does the government control?
This split tells you where to push and where to wait.
| Step | Who controls it | Source |
|---|---|---|
| Company facility clearance | A government contracting activity or a cleared contractor sponsors you. The government decides. | 32 CFR 117.9. DoDM 5205.07 10.2. |
| DD-254 and SAP addendum | The government. A prime drafts a sub's form for review. | DoDM 5205.07 10.1. |
| Written offer before investigation | You. | 32 CFR 117.10(f). |
| Clearance eligibility | The government's cognizant security agency. | 32 CFR 117.10(a). |
| PSQ and the PAR justification | Your hire fills out the PSQ. An accessed requester writes the PAR justification. | DoDM 5205.07 13.3. |
| Package review and access decision | The SPO, the government PSO, and the government AAA. | DoDM 5205.07 13.4. |
| Polygraph as a must for access | The government, per program. | DoDM 5205.07 12.4. |
| Signed agreement and briefing | Your hire signs. Authorized SAP staff brief. | DoDM 5205.07 12.3. |
| Records, refresher training, change reports | Your CSSO. | DoDM 5205.07 3.1, 12.6, 12.9. |
Your fastest levers are the ones in your column. Before the offer goes out, get the addendum checked and the CSSO named. Line up an accessed requester too.
After access, the work keeps going. Your hire recertifies the PSQ every year. Your CSSO reports any change in their job status in writing.
Where do you find veterans with SAP-relevant experience?
No public source lists people who are read on right now. And a contractor's access moves between jobs only on the same contract. So look for veterans with the clearance level, the continuous vetting, and the work history your program needs.
- Guard and Reserve members: many serve part-time while they work as civilians. Section 12.5 covers a Reserve member who is also a cleared contractor. They hold a separate billet for each role. That keeps access in uniform separate from their contract work. Ask your PSO about the contract billet.
- Local veterans' employment reps: under 38 U.S.C. 4104, each state hires reps. Their job is to "conduct outreach to employers in the area." Ask your state's American Job Center for yours.
- Resumes with the clearance spelled out: a veteran's clearance line tells you the level and the date. The guide to reading a clearance on a resume shows what to check.
Sources: DoD Manual 5205.07 (January 17, 2025 edition), 32 CFR part 117, and 38 U.S.C. 4104. Checked November 2026.
What to Do Next
Before you post the job, line up the three things you control. That's the SAP addendum on your DD-254, a named CSSO, and an accessed requester. Then you need candidates with a final clearance at your program's level.
BMR's pool is a good place to start. 79,061 resumes have been built on BMR. Over 1,000 new profiles are added to BMR every month.
Reach out to access BMR's veteran talent pool and start your search before the PAR goes in.
Frequently Asked Questions
Can a consultant be nominated for SAP access?
Can a dual citizen get SAP access?
What happens to SAP access when a cleared employee leaves my company?
Can we resubmit a nominee who was turned down?
Do SAP-accessed employees have to report foreign travel?
About the author
Brad Tachi is the CEO and founder of Best Military Resume and a 2025 Military Friendly Vetrepreneur of the Year award recipient for overseas excellence. A former U.S. Navy Diver with over 20 years of combined military, private sector, and federal government experience, Brad brings unparalleled expertise to help veterans and military service members successfully transition to rewarding civilian careers. Having personally navigated the military-to-civilian transition, Brad deeply understands the challenges veterans face and specializes in translating military experience into compelling resumes that capture the attention of civilian employers. Through Best Military Resume, Brad has helped thousands of service members land their dream jobs by providing expert resume writing, career coaching, and job search strategies tailored specifically for the veteran community.