How to Hire Veterans for Embedded Software and Firmware Roles

5 min read
Five military jobs feed embedded and firmware work. Get a duty-to-task table, resume translation lines and a bench screen for each.

Hire veterans who are ready for the job

We turn real military records into clear, civilian resumes so your hiring team can see what each veteran actually did.

Talk to us about hiring veterans

Army 35T and 94F, Navy AT and ET, and Air Force 2A0X1 feed embedded and firmware work. O*NET's military crosswalk maps all five to electronics technician work, not to software developers.

So these veterans fit embedded test, validation and board bring-up seats first. That is BMR's read of the crosswalk. To hire veterans for embedded and firmware seats, use the duty-to-task table, resume reads and screen steps.

Which military jobs fit embedded and firmware seats?

Military jobOfficial duty (quoted)Embedded or firmware task it fitsWhat to confirm in the screen
Army 35T, Military Intelligence (MI) Systems Maintainer/Integrator“You’ll maintain, test, and repair communications equipment, and you’ll assess and extract the data from fixed, portable, and wireless communication devices.”Embedded device test and debug on comms and wireless hardware.Which devices they tested, and how they pulled data off them.
Army 94F, Computer / Detection Systems Repairer“You’ll repair everything from electromechanical telecommunications equipment to field artillery digital devices, from Global Positioning System receivers to night vision devices and equipment, and even laser and fiber optic systems.”Board repair and validation on GPS, optics and digital devices.Whether they repaired down to the board or swapped whole units.
Navy AT, Aviation Electronics Technician“Performing micro-miniature module repair on computer circuit cards” and “Reading electrical system diagrams”Board bring-up, rework and schematic-driven debug.One circuit card fault they traced, part by part.
Navy ET, Electronics Technician“Maintaining, repairing and calibrating electronic equipment including radar, communications and navigation equipment”RF and comms hardware test, plus calibration in a validation lab.Which systems they calibrated, and to what written procedure.
Air Force 2A0X1, Avionics Test Station, Components, and Electronic Warfare Systems“Program and operate advanced computerized test stations to run simulation diagnostics on flight control computers”Hardware-in-the-loop benches and automated test.Which flight computers they tested, and on which station.

Duty lines are quoted from each service's career page. The task and screen columns are BMR advice built on those duties.

For tech hiring beyond the lab, see our guide to hiring veterans for software and tech roles.

Can these veterans fill a firmware coding seat?

Not on the job title alone. O*NET lists Electrical and Electronic Engineering Technologists and Technicians (17-3023.00) for all five jobs. It adds Electronics Engineers, Except Computer (17-2072.00) for the Navy AT and ET ratings.

None of the five maps to Software Developers (15-1252.00). O*NET sums up that job as "Research, design, and develop computer and network software or specialized utility programs."

The technician summary reads differently. It begins "Apply electrical and electronic theory and related knowledge, usually under the direction of engineering staff." That points to hardware test, fault isolation and schematic work.

The Army's 35T page lists Software Engineer among its civilian jobs, but the crosswalk does not. BMR's advice: for a seat that is mostly writing firmware, screen for code evidence like any candidate. For test, validation, hardware-in-the-loop and bring-up seats, these veterans line up most directly.

Where do you find veterans with these jobs?

Start with the Department of Labor's Veterans' Employment and Training Service (VETS). Its employer page offers "assistance in finding qualified transitioning service members and veterans in your area." That help runs through its Regional Veterans' Employment Coordinators.

The same page lists the HIRE Vets Medallion, "the only federal-level veterans' employment award." It honors "veteran hiring, retention, and professional development," so it rewards a program you already run.

Approved DoD SkillBridge providers can train service members near separation who have command approval.

For channels that work across hard technical seats, use our sourcing playbook for hard-to-fill technical roles. If the seat travels to customer sites, our field service engineer guide fits better. For military engineers in project and survey work, see hiring veterans for engineering roles.

The Work Opportunity Tax Credit (WOTC) expired at the end of 2025. It is not available for hires who start after that unless Congress renews it. See our WOTC status guide for employers.

How do you read their resumes for embedded skills?

Veterans write in their service's words. Read each line for the task under it. These translations are BMR advice, tied to the table rows.

  • Fault isolation to the component level (2A0X1). Read it as board-level debug and root-cause work.
  • Micro-miniature repair on circuit cards (Navy AT). Read it as rework, soldering and board repair.
  • Calibrating radar, comms or navigation gear (Navy ET). Read it as RF test and calibration in a validation lab.
  • Simulation diagnostics on test stations (2A0X1). Read it as hardware-in-the-loop testing.
  • Extracting data from portable or wireless devices (35T). Read it as device data pulls and interface debug.

A count on a resume, like the number of circuit cards repaired, shows volume. The screen shows depth.

The Navy says AT applicants must be "eligible for security clearance." If a resume lists one, see how to read a security clearance on a resume.

How do you screen them for an embedded seat?

Test the task, not the title. These steps are BMR advice. Copy them into your interview plan.

  1. Run a bench task. Match it to the task column for their job. Plant a fault on one of your boards. Hand over the schematic and your test gear. Ask them to find the fault and talk as they work.
  2. Walk through one real fault. Ask for a failure they isolated in service, start to finish. Listen for the reading they took, the drawing they used, and how they proved the fix.
  3. Read a schematic together. Give them your board's schematic. Ask them to trace one signal from the connector to the processor.
  4. Ask who wrote the test. For test-station jobs like 2A0X1, ask if they wrote the test program or ran it. Both have value, but they fill different seats.
  5. Add a short code exercise for code-heavy seats. Use your own language and toolchain. Grade it the way you grade every candidate.

Set the degree bar by the seat. BLS lists an "Associate's degree" as typical entry-level education for electrical and electronic engineering technicians. It adds that "Candidates for other jobs may qualify with a high school diploma."

Sources checked November 2026: O*NET OnLine, the Army, Navy and Air Force career pages, BLS and the IRS.

Find veterans for your open embedded req

Once your screen is set, fill the pipeline. Reach out to access BMR's veteran talent pool for your embedded test and firmware openings. Over 1,000 new profiles are added every month, and 79,061 resumes have been built on BMR.

Frequently Asked Questions

Is an Army 17C a fit for embedded security work?

Screen a 17C as a security hire first. The Army's 17C page says these soldiers defend "weapons systems, which include satellites, navigation, and aviation systems." O*NET maps 17C to computer systems analyst and information security analyst work. It does not map 17C to electronics technician work.

Can a Navy ET with no degree handle embedded test work?

After boot camp, the Navy lists Apprentice Technical Training (11 weeks) for ETs. It covers "basic electronics and electronic circuitry, safety, digital theory, microcomputers, fiber optics," and troubleshooting. ET "A" School (19 weeks) adds communications hardware and software. BMR's read: that is test-bench groundwork, so judge the skill at your bench.

Does Navy AT work include digital computers?

Yes. The Navy says ATs work with systems "including digital computers, fiber optics, infrared detection, radar, laser electronics, navigation," and more. ATs may work "in a shop environment, clean lab, airplane hangar or office environment." BMR's read: a clean lab is close to an embedded validation lab.

About the author

Brad Tachi is the CEO and founder of Best Military Resume and a 2025 Military Friendly Vetrepreneur of the Year award recipient for overseas excellence. A former U.S. Navy Diver with over 20 years of combined military, private sector, and federal government experience, Brad brings unparalleled expertise to help veterans and military service members successfully transition to rewarding civilian careers. Having personally navigated the military-to-civilian transition, Brad deeply understands the challenges veterans face and specializes in translating military experience into compelling resumes that capture the attention of civilian employers. Through Best Military Resume, Brad has helped thousands of service members land their dream jobs by providing expert resume writing, career coaching, and job search strategies tailored specifically for the veteran community.

Found this helpful?

Share it.

More in Hiring Veterans